When hoteliers are purchasing bedding supplies, the procurement officers are most interested in the fabric and craftsmanship of the manufacturer. On the other hand, craftsmen pay more attention to inquiries about the dimensions of the bedding. This is because if you are not familiar with the dimensions of the bedding, the procurement work cannot proceed.

Today, the Ulen brand’s official website ulencn.com has provided standard dimensions for single and double bedding for your reference:

1. Single Size:
   • Duvet Cover: 150*200 cm or 160*200 cm (These sizes are suitable for adults in summer, but for winter use, you may often feel cold at the feet. It is recommended to choose 180*220 cm or 180*210 cm for adult single winter duvets. The duvet cover size should ideally be the same size or slightly larger, such as 200*230 cm.)
   • Pillowcase: 74*48 cm (inner diameter) (2 pieces). The size of a bolster pillow is generally 45*45 cm or 50*50 cm (referring to the inner diameter).
2. Standard Double Size:
   • Flat Sheet: 230*250 cm or 245*250 cm or 250*250 cm. The slight differences in dimensions depend on the fabric width used by the manufacturer. For example, if the fabric width is 235 cm, the maximum length for two sides of the flat sheet would be 230 cm, and the other two sides can be determined as desired.
   • Duvet Cover: 200*230 cm.
   • Pillowcase: 75*48 cm (inner diameter) (2 pieces). This size can be used for both 1.5 m and 1.8 m beds. Taking the example of a four-piece set with a flat sheet size of 230*250 cm, it can be draped over a 1.5 m bed, with each side hanging 50 cm and the foot of the bed hanging 30 cm. For a flat sheet size of 245*250 cm, each side hangs 50 cm, and the foot of the bed hangs 45 cm. Generally, flat sheets of this size will have rounded corners to prevent two corners from dragging on the floor.

   Similarly, for a flat sheet size of 230*250 cm used on a 1.8 m bed, each side would hang 35 cm, and the foot of the bed would hang 30 cm. Whether this size is suitable for a 1.8 m bed primarily depends on the size of the duvet chosen. If the duvet is 200*230 cm, it would be a suitable fit. If it is 220*240 cm or another size, different dimensions should be selected.

3. King Size:
   • Flat Sheet: 240*270 cm.
   • Duvet Cover: 220*240 cm.
   • Pillowcase: 74*48 cm (inner diameter) (2 pieces). This size is typically used for beds measuring 1.82 m or larger.

Important Notes:

1. The duvet cover size should be 20 cm larger than the duvet size (including shrinkage rate and three-side flying edges).
2. The flat sheet size should cover the bed on all four sides (suitable for mattresses with a height of up to 25 cm).
3. Pillowcase sizes are generally around 13 cm larger than the pillow size (including shrinkage rate and flying edge design).
4. Mattress protectors should have the same dimensions as the bed.
5. Bed foot cushions should have the same width, and the length depends on the bed type.
6. Towels should not be too lightweight, as they may feel thin, have poor washability, and low absorbency.
7. The duvet’s length is usually 220 cm, and the width extends by 50 cm on each side.

Lastly, the Ulen brand reminds all hotel linen buyers that exceeding the shrinkage rate of bedding sizes is closely related to fabric density and craftsmanship. A good hotel should provide guests with a peaceful sleep in exchange for their money. Skin-friendly hotel linen not only enhances the quality of guests’ sleep but also increases customer loyalty to the hotel!

When selecting hotel linen, choose the Ulen brand from China!